Versatile Building Products Deck and Garage Coatings
Click Here to find a local distributor
Click here to obtain more information about Versatile Building Products
Click Here for contact information
Click here to return to Versatile Building Products Home Page

4195
Direct to Concrete Pigmented Epoxy

4195 is a Modified Version of 4150 Vapor Stop to Allow Faster Chipping
4195 Pigmented Direct to Concrete Epoxy
installing 4195 epoxy and flake
Jim with Best Custom Garage has been using 4195 for over 2 years. He wish that they had made the switch sooner because he was having constant adhesion problems with materials made by another big manufacturer (1 in 5 jobs was a problem and this is even after they did mechanical prep which is not needed in most cases with 4195). Jim's exact words are that he has not had a failure since making the switch. You can see Jim in our Roll On Rock™ System 4 video and he says that the 4195 sticks. This is not unusual, we get comments like this from across the country. Not every epoxy works well over concrete and if they say it is limited to only 3lbs of MVE pressure before failing then you better look for something else because it will probably fail.

4195 is a Pigmented direct to concrete two part epoxy designed specifically for receiving the vinyl chips. The 4195 incorporates our proprietary wicking technology which allows it to wick deep into concrete surfaces. This unique technology provides 3 times the adhesion of a standard epoxy installed over a profiled floor. That is why 4195 epoxy will withstand over 8 lbs of MVE where others fail at 3 lbs. 4195 Direct to Concrete Epoxy is available in over 8 colors that are designed to work well with any flake combination. 4195 is self priming which allows the applicator to broadcast into the first coat. 4195 actually wicks into the concrete and bonds so well that you can expect to get over 8lbs of MVE blocking power.

4195 is the ideal epoxy for the installer who wants to chip into the wet epoxy faster.

Features & Advantages

MVE Tolerant
Ideal for Chipping with Vinyl Chips
Wicks Into Concrete
Use Over New or Old Concrete
Low Odor
Easy to Apply

installing 4195 direct to concrete epoxy and flake
installing 4195 direct to concrete epoxy and flake

4195 Chipping Epoxy
Physical Properties
Chemical Resistance
Tests Done at 70 Degrees
  Acetone Spotting
Fahrenheit with 1/2 Pint Mass
 
Pot Life 3 Hours   Xylene No Effect
Gel Time (Hours) 7.75   10% HCL Spotting
Through Dry (Hours) 10.5   Ammonia No Effect
VOC 30 g/l   Degreaser Faint Spotting
Percent Solids 95/Wt. 92/Vol.   Liquid Plummer Faint Spotting
Flammable No   Vinegar Faint Spotting
Odor Low   Clorox Faint Spotting
Pencil Hardness H-2H   Windex No Effect
UV Resistance Poor   Motor Oil No Effect
Non Yellowing Poor   Gasoline No Effect
Abrasion Resistance OK   Hot Tire N/A

See our FAQ page for more tips

©2005 Versatile Building Products. All rights reserved.