4150 Moisture Vapor Reducing Pigmented Epoxy Primer & Sealer |
4150 Vapor Emmision Reducing Penetrating Pigmented Epoxy |
|
|
4150 Vapor Stop Epoxy is a Pigmented two part epoxy primer and sealer designed to reduce moisture vapor emissions from concrete to acceptable levels for moisture and vapor sensitive floor systems and coatings. Vapor Stop is also used for the chip coat in epoxy floor systems that use vinyl chips. Using Vapor Stop reduces the risk of the epoxy floor system from blowing off from high moisture emmission rates. Vapor Stop develops a tenacious bond to properly prepared surfaces and blocks the passage of moisture vapor. It is not uncommon for Vapor Stop to reduce 15lbs of MVE down to 2lbs. Vapor Stop is works so well that it will penetrate and cure within concrete even when applied under water. The system is applied easily by roller or squeegee without odors or flammability issues that could disrupt surrounding operations. Vapor Stop Pigmented Epoxy provides a low MVT Floor Coating suitable for use below a wood, VCT or other type of non breathing floor system. |
Features & Advantages |
MVE Tolerant
Ideal for Chipping with Vinyl Chips
Wicks Into Concrete
Use Over New or Old Concrete
Low Odor
Easy to Apply
|
|
|
4150 Vapor Stop |
Physical Properties |
|
Chemical Resistance |
Tests Done at 70 Degrees |
|
Acetone |
No Effect |
Fahrenheit with 1/2 Pint Mass |
|
Pot Life |
60 minutes |
|
Xylene |
No Effect |
Gel Time (Hours) |
2.75 |
|
10% HCL |
Spotting |
Through Dry (Hours) |
12 |
|
Ammonia |
No Effect |
VOC |
29 |
|
Degreaser |
Faint Spotting |
Percent Solids |
97/Wt. 94/Vol. |
|
Liquid Plummber |
Faint Spotting |
Flammable |
No |
|
Vinegar |
Faint Spotting |
Odor |
Low |
|
Clorox |
Faint Spotting |
Pencil Hardness |
H-2H |
|
Windex |
No Effect |
UV Resistance |
Good |
|
Motor Oil |
No Effect |
Non Yellowing |
Good |
|
Gasoline |
No Effect |
Abrasion Resistance |
OK |
|
Hot Tire |
N/A |
|
|
|